Double exposure protection
With the P - back for Contax it is not possible to ac-
cidently double expose the image by capturing one
image quickly after another e.g. when using continuos
capture mode. The P back communication with the
CONTAX 645 is disabling capture functionality in the
camera when necessary.
Image orientation detection
The CCD in P back is positioned in landscape orienta-
tion. Whenever an image is captured in portrait posi-
tion by rotating the camera, an internal sensor detects
this new position and the image will appear with the
correct orientation in the Capture One application.
Camera orientation:
Images can be captured in all three positions - and will appear with
the correct orientation on the LCD and in the Capture One software.
To Next Page
Loading...
Need help?
General
