Configuration
"Configuration" is used
to setup general settings
and perform general tasks
on the P back.
"Configuration" con
-
tains more menu
entries than can be
displayed on one
screen. This is indi-
cated by a double
arrow pointing down
in the right side.
Scrolling past the last
menu entry will reveal the next entry. Now the arrow in
the top right side will turn into a double arrow, to indi-
cate that there are hidden entries at the top.
Storage
"Storage" is per default
set to "Autodetect". If a
card is inserted in the P
back it will automatically
capture to this card. If not,
it will try to capture via the
IEEE 1394/FireWire port
directly to the computer.
If the P back is not tethered to a com-
puter you will get an error message that
the card slot in the P back is empty.
The P back can also be forced to shoot
to either Compact Flash or IEEE 1394/
FireWire by selecting the options inside "Storage".
To Next Page
Loading...
