5. CF Card Usage
When working with CF-cards, card readers and digital
cameras it is very important to follow a few rules, to
avoid loss of data or uncontrolled behavior.
Phase One recommends that you test-drive all new
Compact Flash
TM
cards (including the one enclosed).
By doing an initial test to verify that the capture files are
stored properly on the card and can be accessed on a
computer you will avoid unpleasant surprises on loca-
tion or when you return from a job. Compact Flash
TM
cards are manufactured by other suppliers, and Phase
One cannot guarantee that the cards are not defected.
Inserting and ejecting on the P back
The compact flash card or
micro drive is inserted in the
hidden slot located under the
cover on the left hand side of
the P back.
Insert the card with the brand
label facing backwards as
shown in the image.
When the card is fully inserted
no parts are sticking out and
the cover can be closed.
To eject the card push the small
button just above the card
once, and an ejecting pin will come out.
Pushing this pin all the way back in will eject the card.
To Next Page
Loading...
Need help?
General
