Studio flash sync on the RZ lens shutter
When using the P back on a Mamiya RZ67 PRO IID, the
flash sync should be connected on the Mamiya lens
shutter. The flash sync connector on the P back is for
use with Large format cameras where no digital inter-
face is available.
Shutter latency settings
The Mamiya RZ PRO IID should be used with Short la-
tency.
Default your P back is set to Short latency, which
means that the P back will respond fast on triggering
at the cost of battery time.
To learn how to setup latency please consult the Menu
mode section