Mounting the P back vertically
The P back can be rotated to the left and mounted ver-
tically on the Hasselblad body for use in portrait mode.
In this case the lock button on what is now the top
should be slided to the left before tipping the P back in
place on the body.
Images will be ro
-
tated automatically
on both the LCD-
screen and in the
Capture One appli-
cation.
Do not mount while in S or RS modes
Please note that the Phase One P back should not be
mounted while the camera is set to mirror up (S or RS
modes). Also make sure that the lens is not jammed
when connecting the flash sync cable to the Phase
One P back.
To Next Page
Loading...
Need help?
General
