PhaseOne P 25 - Camera Body Specifics

P - Series
Reference Manual
64
Camera body specifics
Regardless of which Hasselblad V type camera used,
a sync cable is always connected from the lens to the
small connector in the front plate on either the left or
right side of the P back.
The flash cable
is then con
-
nected to the
F-connector
on the camera
back.
Flash cable connects
to the connector on
the P back
Sync cable connects
to one of the two small
connectors in the front
plate.
For tethered capture to
a computer - plug in a
IEEE1394/FireWire cable
in the back.