EasyManuals Logo

PHICOMM X100 User Manual

PHICOMM X100
49 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
Copyright@2014 Phicomm Europe GmbH – Print version only for private use
32
HANDLE SETTINGS WITH THE NOTIFICATION PANEL
Using the status bar, you also can ajdust the basic device settings,
such as WLAN, Bluetooth™ or Mobile data.
1. Tap on the status bar and move downwards.
2. Tap on the function you would like to adjust.
USING SD CARD AS USB DISK DRIVE
Set your storage card as USB disk drive if you want to transmit
music, photos and other information to your phone storage card.
The device support Micro SD™ cards that also can be used in other
compatible devices.
SET UP SD CARD AS USB DISK DRIVE
1. Connect your phone to your computer with a USB data cable.
You will get a notification in the status bar.
2. Pull down the status bar.
3. Tap on USB debugging connected.
4. Tap on the check box USB debugging to activate it and
confirm with OK.
5. Pull down the status bar again.
6. Tap on Connected in / as … .
7. Select an option.
DISCONNECT USB CONNECTION SAFETLY
1. Pull down status bar.
2. Tap on USB debugging connected.
3. Tap on the check box USB debugging to disconnect from your
PC safely. You now can remove the data cable.
OPTIMIZE PHONE MEMORY
The phone memory is made up as follows:
Internal memory: Randon Access Memory (RAM)
Internal drive space: Read Only Memory (ROM)
SD-Karte: drive space
The RAM is usually very limied. It mus be ensured that a sufficient
amount of memory (RAM) is always available. Ohterwise, the
phone reacts very sluggish, applications can not boot or crash and
it may possibly be a problem with the installation of new apps.
Please note RAM con not be expanded.
Copyright@2014 Phicomm Europe GmbH – Print version only for private use
33
The majority of the internal drive memory is already occupied by
the operation system and pre-installed applications. These can’t be
removed without proper root privilges. Please note, warranty
expires if the devices was rooted self-employed.
The ROM can be expanded by using a SD card. Many applications
can be installed directly to the SD card after download. However,
each application will still store some data automatically on the
ROM. Unfortunately, some applications can not be moved to the
SD card as these do not work properly from there.
Here are some tips on how you can set your Phicomm smartphone
save storage space:
1.
Apps that start automatically
Surely you use applications where it is desireable that these
start immediately after switching on the phone. Other hand,
numerous applications are preinstalled that you do not use. The
social network apps for example mostly use a huge part of ROM
and RAM.
With app “Startup Manager” from Google Play™ you can assign
any application easily whether it should start automatically or
not. Please only deactivate the automatic start if you are sure
of the mode of action. Otherwise, the function of your
smartphone might be limited.
2.
Monitor background processes
In most cases the background processes of the apps thus
contributes to a decrease of performance. With the Android
Assitant” from Google™ you can monitor such processes and
close unneeded applications.
Phicomm also provides a pre-installed application called
“Process Manager to monitor and optimize background
processes. The Memory tab shows what process is running in
the background and is proposed for closure.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the PHICOMM X100 and is the answer not in the manual?

PHICOMM X100 Specifications

General IconGeneral
BrandPHICOMM
ModelX100
CategoryCell Phone
LanguageEnglish

Related product manuals