PHICOMM X100 User Manual

Copyright@2014 Phicomm Europe GmbH – Print version only for private use
46
SWITCH ON / OFF SPEAKER DURING A CALL
1. Tap on ❸ to activate the speaker. The icon will be highlighted
with a blue bar when activated.
2. Tap again on ❸, to deactivate the speaker. The blue bar
disappears when the speaker is turned off again.
WARNING ！
！！
！ To prevent potential damage to your
ear, do not kep your ear directly to the activated
speaker.
MUTE PHONE DURING A CALL
1. Tap on ❹, to run off microfone. The icon will be highlighted
with a blue bar when muted.
2. Tap again on ❹, to deactivate mute function. The blue bar
disappears when mute function is turned off.
PUT A CALL ON HOLD
1. Tap on ❺, to interrupt the call. The icon will be highlighted
with a blue bar when call is on hold.
2. Tap again on ❺, to continue the call. The blue bar disappears
when call continues.
END A CALL
Tap on ❶ to end the call.
If the number is not stored in your contacts, you can find it in the
call history and add it to your contact list after you hang up.
TO USE CALL HISTORY
The symbol will appear in the status bar when you missed a
call. You can use the call history to check / edit missed calls,
incoming and outgoing calls.
Number Function
❶ Ending a call
❷ Open dial-keypad
❸ Activate speakerphone
❹ Microfone on / off
❺ Interrupt call
❻ Initiate a conference call
❼ Shows what SIM card you are using for the call
Copyright@2014 Phicomm Europe GmbH – Print version only for private use
47
USE THE CALL HISTORY
1. Tap on the home screen on Phone.
2. Tap on . You will get an overview of missed, outgoing
and incoming calls.
3. Tap on next to the number / name, to make a call.
4. Press and hold the pictures space holder to add to contacts.
5. Tap on to send a text message to this contact.
NOTICE: The phone will recall on the current SIM card by
default, if you use the call history directly.
CLEAR THE CALL HISTORY
Follow the next steps to clear the call history:
1. Tap on the home screen on Phone.
2. Tap on . You will see and overview of all missed, incoming
and outgoing calls.
3. Tap on the menu key > Clear call log to delete the whole list.
4. To delete a single call tap on the call and then tap on the menu
key.
5. Tap on Remove from call log.
MULTIPLE CALLS
If you enabled the call waiting function you can perform multiple
calls simultaneaously. You will get an alert about another incoming
call with a beep.
ACTIVATE CALL WAITING SERVICE
1. Tap on the homescreen on the menu key.
2. Tap on System settings > SIM settings.
3. Tap on the SIM card you would like to activate the call waiting
service.
4. Tap on Call settings > Additonal settings.
5. Tap on Call waiting, to activate / deactivate this service. A
checkmark in the check box means that this service is activated.
NOTICE:
 Not all mobile phone contracts can execute the call waiting
service.
ANSWER FURTHER CALL / CURRENT CALL ON HOLD
If you hear repeaded beeps during a call, slide up the phone
symbol on the display to the right to answer the new incoming call.
The first call will remain in holding position.

PHICOMM X100 Specifications

General

Brand	PHICOMM
Model	X100
Category	Cell Phone
Language	English