EasyManua.ls Logo

PHICOMM X100 - Phone Settings and Management

PHICOMM X100
49 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Copyright@2014 Phicomm Europe GmbH – Print version only for private use
64
3. Activate WLAN by sliding the bar from OFF to ON and then
tap on WLAN.
4. Tap the menu key and tap on Scan. The phone is now
searching for available WLAN networks and displays them in a
list.
5. Tap on the WLAN network you want to connect to and follow
the instructions.
WLAN-NETZWERK MANUELL HINZUFÜGEN
1. Tap on the homescreen on the menu key.
2. Tap on System settings > Wireless & Networks.
3. Activate WLAN by sliding the bar from OFF to On.
4. Tap on WLAN and then on Add network .
5. Enter the network SSID.
6. Tap on Security, to select a securty type
7. Enter the password if prompted.
8. Confirm with Save.
NOTICE: Contact your wireless network provider to obtain
information about the exact settings for the SSID network.
WLAN NETWORK STATUS
If you are connected to a WLAN network or when a WLAN
network is available within your each, you can view the status. You
can set up your phone to get a notification when an open WLAN
network is detected.
Status bar: Once you are connected to a WLAN network, the
WLAN icon appears and informs you about the signal strength .
If the WLAN notification is enabled, you will be automatically
informed by this symbol when an open network has been
detected.
ENABLE WLAN NETWORK NOTIFICATION
1. Turn on WLAN, if ist not already turned on.
2. Tap on the homescreen on the menu key.
3. Tap on System settings > Wireless & Networks > WLAN.
4. Tap on the menu key > Advanced.
5. Tap on the check box Network notification.
Copyright@2014 Phicomm Europe GmbH – Print version only for private use
65
SHOW DETAILED INFORMATION ABOUT THE ASSIGNED WLAN
NETWORK
1. Tap on the homescreen on the menu key.
2. Tap on System settings > Wireless & Networks > WLAN.
3. Tap on the WLAN network to which you are currently
connected. Detailed information about the network will be
displayed.
4. To close this information tap on Cancel.
DISCONNECT WLAN NETWORK
1. Tap on the home screen on the menu key.
2. Tap on System settings > Wireless & Networks > WLAN.
3. Tap on the WLAN network you want to disconnect.
4. Tap on Forget.
WLAN NETWORK IN STANDBY MODE
Enabling the wireless network in standby mode, you can specify
when to switch from WLAN to mobile data.
NOTICE: If you are not connected to a WLAN network, the phone
uses a mobile data connection to access the internet (if you have
set up and eabled a mobile data connection on your phone).
1. Tap on the homescreen on the menu key.
2. Tap on System settings > Wireless & Networks > WLAN.
3. Tap on the menu key > Advanced.
4. Tap on Keep WLAN on during sleep.
5. Select an option.

Table of Contents

Related product manuals