Why is there no power to my Philips CRT TV?
First, check the TV's power cord. Unplug it from the TV, wait 10 seconds, and then plug it back into the wall outlet. Ensure you plug the power cord directly into the wall socket, not an extension cord. If an extension cord is necessary, verify that the fuse on the AC power strip is intact.
What to do if my Philips CRT TV remote control is not working?
Ensure the batteries are correctly inserted into the remote control, following the diagram in the battery compartment. Also, try resetting the television by disconnecting the power plug from the wall outlet for 10 seconds, and then reconnecting it.
What to do if my Philips CRT TV is not responding to the remote control?
Make sure the batteries are inserted correctly into the remote control, according to the illustration inside the battery compartment. You can also reset the TV by unplugging it from the wall outlet for 10 seconds and then plugging it back in.
What to do if my Philips CRT TV sound is not in Stereo?
First, verify that the cable or broadcast stations are transmitting in STEREO by checking several major network stations. Also, ensure that the SAP feature is turned OFF, as it automatically sets the sound mode to MONO. Finally, set the sound mode to STEREO.
Why does my Philips CRT TV have disturbing sounds?
If the disturbing sound occurs on only one channel, it may indicate a signal problem. Contact your cable provider or local broadcaster for assistance regarding that specific channel.
What to do if my Philips CRT TV displays wrong channel numbers?
Go to the TUNER MODE in the television menu and select the correct signal source. Then, perform the automatic installation again.
What to do if my Philips CRT TV displays wrong channel or no channels above 13?
Go to TUNER MODE in the television menu and select the correct signal source. Then, perform the automatic installation again.
How to get the AV channels on my Philips CRT TV?
Press the CH+ / CH- button on the remote control repeatedly to select the desired AV channels. Note that SVHS can only be selected if an S-VHS device is connected and powered on.
Why does my Philips CRT TV display white lines in letterbox when viewing a DVD disc?
For some DVD discs, this problem is inherent and does not necessarily indicate a fault requiring a service call.
Provides instructions and warnings for cleaning and maintaining the TV.
To Next Page
General