Philips 20PT6446 - Auto Program

16
AUTO PROGRAM
Y
ou can auto install programs on your TV
Y
ou can auto install programs on your TV
Y
.
This makes it easy for you to select only the TV stations in your area
when the CH+ or CH– buttons are pressed.
Ywhen the CH+ or CH– buttons are pressed. Y
When CABLE is selected, channels 1 - 125 are available.
When ANTENNA is selected, channels 2 - 69 are available.
When AUTO is selected, the TV will automatically set itself to
the correct mode based on the type of signal it detects when the
AUTO PROGRAM feature is activated.
HELPFUL HINTS
NOTE :
Ensure that the Antenna or Cable signal
connection has been completed befo
re AUTO
PROGRAM
is activated.
1
Press the MENU button
on the remote
control to show the on-screen menu.
2
Press the CURSOR
<
or
>
to scro
ll
through the on-sc
reen menu until the wor
d
INSTALL
is highlighted.
3
Press the
CURSO
R >
to display the
INSTALL
menu features.
4
Press the
CURSOR
<
or
>
to scroll
through the Install features unti
l the wor
d
TUNER MODE
is highlighted.
5
Press
CURSOR >
to s
tart the Auto
Program scanning of channels. Auto
Programm
ing will store all available channels
in the TV’s memory then tune to the lowe
st
available channel when done.
.
6
W
hen finished, press the STATUS
/
EXIT button
on the remote control to
remove the menu from the TV’s screen.
58
59
VOL
Channel Edit
Channel Edit
>
>
<
>
STATUS /
EXIT
MENU