Philips 20PT6446 - How to Use the Tuner Mode Control

15
HOW TO USE THE TUNER MODE CONTROL
T
he TUNER MODE control allows you to change the TV’s input signal to either ANTENNA, CABLE or AUTO mode.
T
he TUNER MODE control allows you to change the TV’s input signal to either ANTENNA, CABLE or AUTO mode.
T
It is important for the TV to know which type of signal to look for (Antenna or Cable). In the AUTO mode, when
TIt is important for the TV to know which type of signal to look for (Antenna or Cable). In the AUTO mode, when T
the AUTO PROGRAM feature is activated, the TV will automatically choose the correct mode.
When CABLE is selected, channels 1 - 125 are available.
When ANTENNA is selected, channels 2 - 69 are
available.
When AUTO is selected, the TV will automatically set
itself to the correct mode based on the type of signal it
detects when the AUTO PROGRAM feature is activated.
Language
Tuner Mode
Auto Program
Channel Edit
Language
Tuner Mode
Auto Progra
m
Channel Edit
Install
Language
Tuner Mode
Auto Progra
m
Channel Edit
Install
OR
Language
Tuner Mode
Auto Progra
m
Channel Edit
Install
OR
Cable
Auto
VOL
>
>
<
>
STATUS /
EXIT
MENU
1
Press the MENU button
on the remote
control to show the on-screen menu.
2
Press the CURSOR
<
or
>
to scro
ll
through the on-sc
reen menu until the wor
d
INSTALL
is highlighted.
3
Press the
CURSO
R >
to display the
INSTALL
menu features.
4
Press the
CURSOR
<
or
>
to scroll
through the Install features unti
l the wor
d
TUNER MODE
is highlighted.
5
Press the CURSOR >
to select
ANTENNA, CABLE or
AUTO
mode.
.
6
W
hen finished, press the STATUS
/ EXIT
button
on the remote control to remove the
menu from the TV’s screen.
HELPFUL HINTS