Philips 8FF3WMI User Manual

11
Set up wireless connection
You can wirelessly connect the PhotoFrame to
a PC/Mac or the Internet to share photos with
one of the following methods:
Using a WPS-enabled router
Using a Windows Vista PC
Manually
Set up wireless connection with WPS-
enabled router
What you need:
A wireless router that is WPS-enabled
Broadband Internet access
1 Press the WPS button on the PhotoFrame.
The PhotoFrame begins to scan the
wireless network.
2 Within 2 minutes, press the WPS button
on the router.
•
•
•
•
•
»
Internet
O
W
S
E
R
Internet
O
W
S
E
R
WPS
PhotoFrame
WPS
PhotoFrame
If there is no language selection,
the PhotoFrame displays photos in
slideshow mode about 30 seconds
later.
For any other time use
After the PhotoFrame is turned on, the
main menu is displayed.
If there is no main menu selection,
the PhotoFrame displays photos in
slideshow mode about 20 seconds
later, in the following priority:
1. SD/MMC/xD/MS/MS Pro Duo
2. CF
3. USB
4. PhotoFrame
To turn off the PhotoFrame, press and hold
for more than 2 seconds.
»
•
»
»
•
English
EN

Philips 8FF3WMI Specifications

Picture/Display

viewing angle	130º (H)/110º (V)
lifetime to 50% brightness	20, 000 hr
aspect ratio	4:3
panel resolution	800 x 600
brightness	250 cd/m²
contrast ratio (typical)	300:1

Storage Media

built-in memory capacity	512 MB
memory card types	Compact Flash type I, Secure Digital (SD), Secure Digital (SDHC), Multimedia Card, xD card, Memory Stick, Memory Stick Pro, Memory Stick Duo, Memory Stick Pro Duo
USB	USB flash drive

Power

power supply	100-240 VAC, 50/60 Hz
power source	DC output 9 V, 2 A
power consumption (system on)	5.09 W

Operating Environment

temperature range (operation)	0°C to 40°C
temperature range (storage)	-10°C to 60°C
regulatory approvals	CE, GOST, Switzerland, UL

Dimensions and Weight

set dimensions with stand	222.6 x 182.2 x 33.2 mm
weight	0.34 kg
packaging dimensions	27.8 x 22.9 x 10.7 cm