Philips 8FF3WMI - Reset All Settings to Factory Default; Update the Photoframe

43
2 Select [Installation] > [Default], then press
OK to confi rm.
A caution message is displayed.
3 Select [OK], then press OK to confi rm.
The PhotoFrame resets all settings
to factory default and turns off
automatically.
Update the PhotoFrame
You can download the latest software from
www.philips.com to update the PhotoFrame.
1 Download the latest software onto the
root directory of a storage device, for
example an SD card.
2 Insert the SD card into the PhotoFrame.
»
»
2 Select [Status] to view the information of
the PhotoFrame.
Reset all settings to factory
default
1 In the main menu, select [Settings], then
press OK to confi rm.
English
EN