Philips 8FF3WMI User Manual

17
Set up TCP/IP connection
(For advanced users only)
You can set up TCP/IP connection for a
customized Internet protocol setting.
1 In the main menu, select [Settings], then
press OK to confi rm.
2 Select [Installation] > [Network] > [TCP/
IP] > [Address Mode], then press OK to
confi rm.
3 Select [Automatic (DHCP)], then press
OK to confi rm.
6 Select [Pictures] under [Media tpyes:],
select [All ratings] under [Parental
ratings], then click [OK] to confi rm.
7 Select the PhotoFrame and click [Allow].
8 Click [OK] to confi rm.
9 Display photos in the shared folder on
a PC on a home network (see ‘Display
streaming photos in a shared folder on a
home network’ on page 20).
English
EN

Philips 8FF3WMI Specifications

Picture/Display

viewing angle	130º (H)/110º (V)
lifetime to 50% brightness	20, 000 hr
aspect ratio	4:3
panel resolution	800 x 600
brightness	250 cd/m²
contrast ratio (typical)	300:1

Storage Media

built-in memory capacity	512 MB
memory card types	Compact Flash type I, Secure Digital (SD), Secure Digital (SDHC), Multimedia Card, xD card, Memory Stick, Memory Stick Pro, Memory Stick Duo, Memory Stick Pro Duo
USB	USB flash drive

Power

power supply	100-240 VAC, 50/60 Hz
power source	DC output 9 V, 2 A
power consumption (system on)	5.09 W

Operating Environment

temperature range (operation)	0°C to 40°C
temperature range (storage)	-10°C to 60°C
regulatory approvals	CE, GOST, Switzerland, UL

Dimensions and Weight

set dimensions with stand	222.6 x 182.2 x 33.2 mm
weight	0.34 kg
packaging dimensions	27.8 x 22.9 x 10.7 cm