1-4-8 E9480FIS
Check the interface between the remote control and
the DCB by checking the key-code displayed. At least
one key must be tested. The test can be exited by
pressing the STOP-,REC-, or PLAY-key on the local
keyboard. The user should press PLAY to indicate a
successful test. The REC-key is pressed if the test
failed, and STOP can be pressed to abort the test. The
keyboard can also be used for the same purpose .The
O or o key stops the test and the N or n key indicates
an error. The rest of the keys of the keyboard are used
to abort this test at any time.
100500 Remote Control test succeeded.
100501 DCB could not be accessed by the analogue board.
100502 There was no response from the analogue board.
100503 The error code returned from the analogue board is unknown.
100504 DCB Remote control; no user input received.
100505 DCB Remote control; test failed.
100506 DCB Remote control; test aborted.
100507 Failed to clear FP buffer.
100508 Test stopped from service port.
Switch the record LED on, and after confirmation off.
The user confirms by pressing the REC key, STOP key,
or the PLAY key on the local keyboard. The PLAY key
confirms that the LED is on and the REC key indicates
an error. The STOP key signals the abortion of the test
by the user. The keyboard can also be used for the
same purpose . The O or o key confirms that the test
pattern is OK and the N or n key indicates an error or
that the user wants to go to the next test. The rest of
the keys of the keyboard are used to exit this nucleus at
any time. After that the nucleus switches the LED off.
100600 Switching Led on succeeded.
100601 DCB could not be accessed by the analogue board.
100602 There was no response from the analogue board.
100603 The DCB did not light all the leds.
100604 The user skipped the rest of the test.
100605 The user returned an unknown confirmation:
100606 The error code returned from the analogue board is unknown.
Check the communication between the digital board
and the analogue board by issuing some echo string.
110000 Communicating with the analogue board succeeded.
110001 The test returned the wrong string.
110002 Communicating with the analogue board failed.
110103 The analogue board returned an unexpected result.
110104 Receiving character failed.
Check the communication between the digital board
and the NVRAM on the analogue board.
110100 Communicating with the NVRAM on the analogue board succeeded.
110101 The analogue board could not communicate with the NVRAM.
110102 Communicating with the analogue board failed.
110103 The analogue board returned an unexpected result.
110104 The write-read test failed.
Check the communication between the digital board
and the tuner on the analogue board.
110200 Communicating with the tuner on the analogue board succeeded.
110201 The analogue board could not communicate with the tuner.
110202 Communicating with the analogue board failed.
110203 The analogue board returned an unexpected result.
Check the communication between the digital board
and the data slicer on the analogue board.
110300
Communicating with the data slicer on the analogue board
succeeded.
110301 The analogue board could not communicate with the data slicer.
110302 Communicating with the analogue board failed.
110303 The analogue board returned an unexpected result.
Check the communication between the digital board
and the sound processor on the analogue board.
110400
Communicating with the sound procesor on the analogue board
succeeded.
110401
The analogue board could not communicate with the sound
processor.
110402 Communicating with the analogue board failed.
110403 The analogue board returned an unexpected result.
Check the communication between the digital board
and the A/V-selector on the analogue board.
110500
Communicating with the A/V selector on the analogue board
succeeded.
110501 The analogue board could not communicate with the A/V selector.
110502 Communicating with the analogue board failed.
110503 The analogue board returned an unexpected result.
Get the hardware version of the analogue board.
110600 Reading the hardware version succeeded.
110601 The segment containing the hardware version could not be found.
110602 Communicating with the analogue board failed.
110603 The analogue board returned an unexpected result.
Get the software version of the boot software of the
analogue board.
110700 Reading the boot-software version succeeded.
110701 The segment containing the boot-software version could not be found.
110702 Communicating with the analogue board failed.
110703 The analogue board returned an unexpected result.
Description Error No. Error Description
To Next Page
Loading...
