1-4-9 E9480FIS
Get the software version of the download software of
the analogue board.
110800 Reading the download-software version succeeded.
110801
The segment containing the download-software version could not be
found.
110802 Communicating with the analogue board failed.
110803 The analogue board returned an unexpected result.
Get the software version of the application software of
the analogue board.
110900 Reading the application-software version succeeded.
110901
The segment containing the application-software version could not be
found.
110902 Communicating with the analogue board failed.
110903 The analogue board returned an unexpected result.
Get the software version of the diagnostic software of
the analogue board.
111000 Reading the diagnostics-software version succeeded.
111001
The segment containing the diagnostics-software version could not be
found.
111002 Communicating with the analogue board failed.
111003 The analogue board returned an unexpected result.
Check the checksum of the several partitions by
recalculating and comparing partition checksums.
111100 Checksum calculation succeeded.
111101
Either the segment could not be found or the checksum was not
correct.
111102 Communicating with the analogue board failed.
111103 Communicating with the analogue board failed.
111104 The analogue board returned an unexpected result.
Perform the routing of the video paths on the analogue
board.
111200 Routing the video on the analogue board succeeded.
111201 Routing the video on the analogue board failed.
111202 The user provided wrong input.
111203 Communicating with the analogue board failed.
111204 The analogue board returned an unexpected result.
Perform the routing of the audio paths on the analogue
board.
111300 Routing the audio on the analogue board succeeded.
111301 Routing the audio on the analogue board failed.
111302 The user provided wrong input.
111303 Communicating with the analogue board failed.
111304 The analogue board returned an unexpected result.
Set the tuner to receive a valid audio and video signal
111400 Setting the tuner channel succeeded.
111401 Setting the tuner channel failed.
111402 The user provided wrong input.
111403 Communicating with the analogue board failed.
111404 The analogue board returned an unexpected result.
Perform an IIC write and read action on the analogue
board
111500 Reading and writing IIC on the analogue board succeeded.
111501 Reading or writing IIC on the analogue board failed.
111502 The user provided wrong input.
111503 Communicating with the analogue board failed.
111504 The analogue board returned an unexpected result.
Set the clock to the value passed through in the YYYY
MM DD HH MM SS format.
111600 Adjusting the clock succeeded.
111601 Adjusting the clock failed.
111602 The user provided wrong input.
111603 Communicating with the analogue board failed.
111604 The analogue board returned an unexpected result.
Generate a 1 kHz signal on pin 7 (INT) of the clock IC.
111700 Generating the signal on the designated pin succeeded.
111701 Generating the signal on the designated pin failed.
111702 Communicating with the analogue board failed.
111703 The analogue board returned an unexpected result.
Store the clock IC correction value in NVRAM.
111800 Storing the correction value for the clock in NVRAM succeeded.
111801 Storing the correction value for the clock in NVRAM failed.
111802 Invalid input; default value stored.
111803 Communicating with the analogue board failed.
111804 The analogue board returned an unexpected result.
111805 The user provided wrong input.
Description Error No. Error Description
To Next Page
Loading...
