1-4-10 E9480FIS
Store the reference voltage for the tuner in NVRAM.
111900 Storing the reference voltage for the tuner in NVRAM succeeded.
111901 Storing the reference voltage for the tuner in NVRAM failed.
111902 The user provided wrong input.
111903 Communicating with the analogue board failed.
111904 The analogue board returned an unexpected result.
Store the frequency table in NVRAM. The frequency
table is passed through the error-string provided to the
nucleus.
112000 Downloading the frequency table in NVRAM succeeded.
112001 Downloading the frequency table in NVRAM failed.
112002 The user provided wrong input.
112003 Communicating with the analogue board failed.
112004 The analogue board returned an unexpected result.
Store the external presets in NVRAM.
112100 Storing the external presets in NVRAM succeeded.
112101 Storing the external presets in NVRAM failed.
112102 Communicating with the analogue board failed.
112103 The analogue board returned an unexpected result.
Measure the audio signal corresponding to 0dB per
channel and store it as correction value in NVRAM
112200 Storing the bargraph adjustment values in NVRAM succeeded.
112201 Storing the bargraph adjustment values in NVRAM failed.
112202 Communicating with the analogue board failed.
112203 The analogue board returned an unexpected result.
Check communication to VCR module via SIO interface
112300 Communication to VCR succeeded.
112201 Communicating with the analogue board failed..
112302 Wrong SIO CRC received.
112303 No SIO data received.
112304 The analogue board returned an unexpected result.
Get the hardware version and type of the digital board. 120000 Getting the hardware version and type of the digital board succeeded.
Get the version of the boot stub software on the digital
board.
120100 Getting the Boot software version succeeded.
Get the version of the download software on the digital
board.
120200 Getting the Download software version succeeded.
Get the version of the application software on the
digital board.
120300 Getting the Application software version succeeded.
120301 Invalid CONS base address.
Upload the contents of the NVRAM on the analogue
board or the digital board to the service PC, by using
the X-modem protocol.
120500 Download succeeded.
120501 User input is not valid.
120502
Something went wrong while copying the data from NVRAM to
SDRAM .
120503 Something went wrong while transferring the data.
120504 User cancelled the upload.
Download a file with the contents of the NVRAM for the
analogue board or the digital board from the service
PC to the recorder, by using the X-modem protocol.
120600 Download succeeded.
120601 The write to NVRAM failed.
120602 Timeout. Too many retries.
120603 A file was sent with a wrong header.
120604 User cancelled the download.
120605 User input is not valid.
120606 Unknown Error.
Set the IEEE 1394 unique ID.
120700 Setting the unique DV ID succeeded.
120701 User input is not valid.
120702 Setting the unique DV ID failed.
120703 Write succeeded, but checksum is corrupt.
120704 Error initialising I2C.
Get the IEEE1394 unique ID.
120800 Getting the unique DV ID succeeded.
120801 Getting the unique DV ID failed.
Description Error No. Error Description
To Next Page
Loading...
