19
1
Getting Started
Recording and playback capacities
The following table shows the number of recordable images and the playback time
available with AA alkaline batteries (at temperatures between 10 °C and 30 °C).
Type of battery Number of recordable Standard playback time
standard images
AA alkaline batteries Approximately 150 images Approximately 2 hours
* The battery life varies according to flash usage and other factors.
* Results may vary according to the type and brand of battery.
Note:
• Whenever you do not have access to an electrical outlet, always carry four extra batteries.
• The battery symbol ( ) appears on the LCD monitor to indicate that the batteries are weak or
depleted. Replace the batteries.
For rechargeable Nickel Cadmium or nickel-metal-hydride batteries, the time between light-
ing of the battery symbol and complete depletion of the batteries is shorter than when alka-
line batteries are used. The batteries run out quickly after the symbol lights.
Safety Precautions
• Do not use damaged batteries or batteries that are almost depleted.
• Do not subject the batteries to strong impact.
Inserting a Lithium Battery
The lithium battery (CR2025) maintains the set date and time. Insert the lithium battery
before starting to operate the camera.
R Caution
• To prevent fire and shock, do not use metal objects, such as twee-
zers, to grasp the batteries. This may short out the circuit.
q After closing the LCD monitor, use a ball
point pen to move the battery compart-
ment switch (on the bottom of the cam-
era) to the left.
Note: See “Turning on the Power” on page 28 for more infor-
mation on the power supply of the camera.
w Then, pull out the lithium battery tray by
pulling the tray’s lever out and to the left.
m
To Next Page
Loading...
