41
3
Picture-Taking Applications
DATE
Daylight Mode
Use Daylight Mode when shooting a picture outdoors or when the Auto White Balance
does not work properly.
q When the REC(ord)/PLAY switch is set to
REC, press the FLASH button while press-
ing the
UU
UU
U button.
w Within three seconds, press the
UU
UU
U or
TT
TT
T
button repeatedly until the
symbol ap-
pears on the LCD monitor. The
will re-
main on the LCD monitor for about three
seconds.
Important
• The Flash Off mode is set when the Daylight mode is set. At this time, the flash mode cannot be
switched, even if the FLASH button is pressed.
• The color tone of the same subject may vary depending on weather conditions .
Canceling the Mode
Press the FLASH button while pressing the U button, then use the U or T button to
choose a White Balance mode.
To Next Page
Loading...
