To Next Page
E
Emily WestSep 12, 2025
Why are other LEDs not lighting up on my Philips GC 8930?
- JJeffrey SmithSep 12, 2025
If other LEDs on your Philips Iron are not lighting up, the issue might be with the Power PCBA. Consider replacing it.
Why are other LEDs not lighting up on my Philips GC 8930?
If other LEDs on your Philips Iron are not lighting up, the issue might be with the Power PCBA. Consider replacing it.
What causes no pumping in a Philips GC 8930 Iron?
If your Philips Iron is not pumping, it could be due to a faulty Pump Assy, the Trigger, or the Power PCBA. Consider replacing these parts.
Verify soleplate temperature meets IEC requirements at maximum setting.
Perform leakage current checks and verify product functionality post-repair.
Procedures for self-checks and resetting to Factory Mode Test.
Detailed process and technician actions for executing self-check mode.
Table listing specifications for different product models.
Detailed overview of product features and functionalities.
Schematics illustrating the internal wiring of the iron and stand units.
Lists common issues, their root causes, and recommended solutions.
Interprets LED blinking patterns for error signals and system status.
Steps for removing screws, LEDs, trigger, chassis, and hose cord from the iron.
Steps for removing water tank, screws, tray, rinse parts, hoses, and PCBA from the stand.
Steps for removing screws, spacers, boiler, inlet coupling, and mainscord from the stand.
Steps for lifting and removing the spring and lock assembly.
Steps for reassembling rubber bung, hose cord, screws, mica washer, and wiring.
Steps for assembling rubber support, wiring, LED Assy, inlay, and final screws.
Steps for assembling cord clamp, mainscord, pump, boiler, wiring, and hoses.
Steps for connecting hoses, assembling spacers, PCBA, inlet coupling, and lock components.
Steps for assembling tray, rinse parts, and water tank.
Instructions for crimping INOX clamp, replacing electrovalve, and PCBA/pump.
Comprehensive list of service parts and their corresponding part numbers by region.
Exploded diagram of the iron showing parts and assembly.
Exploded diagram of the stand showing parts and assembly.
Log of changes, updates, and new versions of the service manual.
General