Setting the language
You can select the language forthe on-screen display(OSD).
The small displayon the video recorder willonly show english
text.
a Switch on the TV set.If required, selectthe programme
number for the videorecorder.
b Press the MENU button on the remote control. Themain
menu will appear.
c Select the line ’LANGUAGE’ andconfirm with the OK
button.
d Select your language withthe P r or P q button and
confirm with the OK button.
e To end, press the TV/STANDBYm button.
Setting the time and date
DIf a TV channel which transmitsTXT/PDC is stored
under programme number ’P01’,time and date will
automatically be takenfrom the TXT/PDC
information.
If the time in thevideo recorder displayis not
correct or if ’--:--’appears in the display,please
set the clock manually.
a Switch on the TV set.If required, selectthe programme
number for the videorecorder.
b Press the MENU button on the remote control. Themain
menu will appear.
c Select the line ’CLOCK’ withthe P r or P q button
and confirm with the OK button.
TIME 20:00
YEAR 1999
MONTH 01
DATE 01
------------------------
-/+ 0-9 OK
d Check the time in line’TIME’. If required, pleasechange
the time with the 0-9 buttons on the remotecontrol.
e Confirm with the OK button.
f Check ’YEAR’, ’MONTH’ and ’DATE’in the same way.
Confirm each entrywith the OK button.
g To end, press the TV/STANDBY m button.
10
To Next Page
Loading...
