f Confirm with the OK button when the informationis
correct.
DThe programming information hasbeen stored in a
TIMER block.
g Select the recording speedSP or LP with the
SP/LP, AV button..
h Make sure that thecassette you have putin can be
recorded on.
i Switch off with the TV/STANDBY m button.
The programmed recording willonly function when the
video recorder isswitched off with the TV/STANDBY m
button.
DIf any of the TIMER blocksare in use, ’k’ willlights
up on the video recorderdisplay.
DWhile a programmed recording isbeing made, you
cannot operate your videorecorder manually. Ifyou
want to cancel the programmedrecording, press the
TV/STANDBYm button.
DIf the video recorder isswitched on a few minutes
before a programmed recordingis supposed to
begin, ’TIMER RECORD’ will flashon the TV
screen.
DIf you reach the end of the cassetteduring a
recording, the video recorderwill automatically
eject the cassette.
DIf you forget to load a cassette,’NO CASSETTE’
will appear on the TV screenand ’k’ will flashon the
video recorder display.
DIf you have put in a cassettewhich cannot be used
for recording, the videorecorder will automatically
eject it.
DIf ’TIMER FULL’ appears on the TV screenwhen
you press the TIMER button, you have used up all
the available TIMER blocks.If you want to clear or
check a TIMER block,select it with the P q or
P r button.
DProgramme numbers ’E1’ and ’E2’ arefor
recordings from othersources (through scartsocket
EXT.1 AV 1 or EXT.2 AV 2 ).
Programming a recording
(without ’SHOWVIEW’)
a Switch on the TV setand select the programme number
for the video recorder.
b Press the TIMER button on the remote control twice.
c Select a free TIMERblock with the P q or P r button.
Press the TIMER button.
DATE PROG START V/P END
01 01 20:00 21:30
------------------------
NEXT gTIMER CLEAR gCL
-/+ 0-9 D/WgSELECT OK
d With the TIMER , C/Sq or D/Sr button you
can select ’DATE’ (date),’PROG’ (programme number),
’START’ (start time)and ’END’ (end time).
Enter or change your informationwith the P q or
P r button, or with the numberbuttons 0-9 .
DUnder ’DATE’, use the SELECT button to selectdaily
or weekly programming.
’D’: Recording from Mondayto Friday.
’W’: Recordings everyweek on the same day.
DUnder ’START’, use the SELECT button to switch
’VPS or PDC’ on or off.
e Confirm with the OK button when the informationis
correct.
DThe programming information hasbeen stored in a
TIMER block.
f Make sure that thecassette you have putin can be
recorded on.
DUse the SP/LP, AV button to selectthe recording
speed ’SP’ or ’LP’.
g Switch off withthe TV/STANDBY m button.
The programmed recording willonly function when the
video recorder isswitched off with the TV/STANDBY m
button.
DIf any of the TIMER blocksare in use, ’k’ willlights
up on the video recorderdisplay.
18
To Next Page
Loading...
