Philips WAC3500 - Preparation; Using the Remote Control; Inserting Batteries into the Remote Control; Using Navigation Controls

22
English
4. Preparation
4.1 Using the remote
control
The WAC3500 is equipped with a remote
control. With the supplied remote control, you
can operate the Center.
IMPORTANT!
– Always point the remote control directly
towards the IR sensor on the Center you
wish to operate.
– First, select the source you wish to
control by pressing one of the source
select keys on the remote control (for
example MP3-CD/CD, HD, HOME).
– Then select the desired function (for
example 2;,
∞ / §).
4.1.1 Inserting batteries into the
remote control
1 Open the battery compartment
2 Insert 2 batteries (type R03 or AAA) into the
remote control with the correct polarity (as
indicated by the “+” and “-” symbols inside the
battery compartment)
3 Replace the compartment door
Caution!
– Remove the batteries when they are exhausted
or when the remote control will not be used for
a long time.
– Do not use old and new or different types of
batteries together.
– Batteries contain chemical substances, hence
they should be disposed of properly.
4.2 Using navigation
controls
When selecting options on the set, you often need to:
1 Press 3 / 4 to highlight an option.
2 Enter its submenu by pressing 2
3 Press 1 to return to the previous option list
4 Press OK/2; or 2 to confirm
4.3 Using alphanumeric
keys
Use the alphanumeric keys to input letters or
numbers.
1 When the text box appears, press the
alphanumeric keys repeatedly until the
desired letter/number appears
2 Press 1 / 2 to move the cursor backward /
forward
Helpful hint:
– You will enter the previous/next option list if
the cursor reaches the beginning or end of the
text box.
3
1
2
MENU
REC
CLEAR
OK
MUSIC BROADCAST MUSIC FOLLOWS ME
MUTE
SLEEP
.,?!’@-_:;/
1
SMART EQ
ghi
4
DBB
jkl
5
INCR SURR
MNO
6
RDS/NEWS
wxyz
3
0
REPEAT
abc
2
SHUFLE
def
3
SAME ARTIST
pqrs
1
SAME GENRE
tuv
2
p1-67-wac3500_ifu_UK 2007.6.20 5:49 PM Page 22