54
English
13. Firmware Upgrade
13.1 Upgrading firmware
You can upgrade the firmware of the
WAC3500 from CD-ROM or via the Wireless
Audio Device Manager (WADM) in the by-
packed PC Suite CD.
1 Register your Philips Wireless Music Center
with www.club.philips.com
2 Download the firmware upgrade files and unzip
and store them on your PC
To upgrade from CD-ROM (recommended):
3 Burn the unzipped upgrade files into a CD-ROM
and load the disc into the Center.
To upgrade via WADM:
3 Place Center on a flat and firm surface
4 Connect Center to power supply
➜ HD screen appears on Center
5 Connect Center to your PC via the supplied
ethernet cable.
6 Install and launch WADM (see Connect to
your PC section B)
7 Click Device Configuration, and then click
the Firmware upgrade sub-menu
8 As prompted, click Browse and indicate the
location where you kept the firmware upgrade
files on PC
9 Click Apply to start upgrading firmware
On Philips Wireless Music Center:
➜ The display shows “Updating firmware,
please wait...”
➜ Center will reboot itself during the installa-
tion process
➜ When Center returns to HD screen, the
installation is completed
IMPORTANT!
– Do not close the web browser, click other
options on the page or browse another
website until the firmware upgrade is
completed.
On Philips Wireless Music Center:
– Never interrupt the firmware upgrading
before its completion.
– Before finishing the installation, never
operate other functions.
13.2 Restoring previous
firmware
After the Center’s firmware is upgraded, you
can restore it to its previous version as desired.
1 Select HD mode, and then select Restore
firmware
a. Press MENU to enter the MENU screen
b. Press the navigation controls 3 or 4 and 2
to enter Settings, Firmware and Restore
firmware one by one.
2 Press 2 to select Ye s
Helpful hint:
– After restoration to previous firmware, the set
will lose Wi-Fi links to associated stations or
external network.
p1-67-wac3500_ifu_UK 2007.6.20 5:49 PM Page 54
To Next Page
Loading...
