Philips WAC3500 - Auto-Standby; Volume Control; Mute; Sound Control

25
English
5. Basic functions
5.3 Auto-standby
When the set has reached the end of playback/
recording and remains in the stop position for
more than 20 minutes, the set will switch to
standby mode automatically to save power.
5.4 Volume control
1 Check that playback has started
2 Adjust the volume with VOL +/- buttons
➜ Display shows the volume bar, indicating the
volume level
5.5 Mute
During playback, you can temporarily switch off
the sound without switching off the set.
1 Press MUTE to switch off the sound.
➜ The icon appears. Playback continues
without sound.
2 To switch on the sound, press MUTE again or
adjust the volume with VOL +.
– You can also switch on the sound by activat-
ing MUSIC BROADCAST on the
Center.
➜ The icon disappears
5.6 Sound control
5.6.1 Equalizer
Equalizer enables you to select predefined
sound settings.
1 Press MENU to enter the menu screen
2 Use the navigation controls 3 or 4 and 2 to
select Equalizer.
3 Press 3 or 4 and 2 to select Rock, Pop
(default), Jazz, Neutral,Techno, Classical or
Bass/Treble
4 Press OK/2; (or 2) to confirm
To set Bass/Treble:
1 Press MENU to enter the menu screen
2 Use the navigation controls 3 or 4 and 2 to
select Settings
3 Press 3 or 4 and 2 to select Treble/Bass
4 Press 1 / 2 / 3 / 4 to select your option:
Treble (+3 to -3), Bass (+3 to -3)
5.6.2 Bass adjustment
● Press DBB (Dynamic Bass Boost) once or
more times to select your option: DBB OFF (by
default), DBB 1, DBB 2 or DBB 3.
Helpful hint:
– Some discs might be recorded in high modula-
tion, which causes a distortion at high volume.
If this occurs, switch off DBB or reduce the
volume.
SCROLL VOL
SLEEP
.,?!’@-_:;/
1
SMART EQ
ghi
4
DBB
jkl
5
INCR SURR
MNO
6
RDS/NEWS
REPEAT
abc
2
SHUFLE
def
3
SAME ARTIST SAME GENRE
MUTE
p1-67-wac3500_ifu_UK 2007.6.20 5:49 PM Page 25