Philips WAC3500 - Playing Music from the USB Device; Transferring Music to the USB Device

45
English
10. External sources
10.1.2 Playing music from
the USB device
1 Check that the USB device is properly connect-
ed to the Center (see 3.1.2 Installation:
Connecting a USB device)
2 Press HOME and use the navigation controls
3 or 4 and 2 to select Por table>USB
➜ The screen shows “USB direct”
– No USB Device Present appears if the USB
device is not supported by the Center
– File system not supported appears if unsup-
ported file formats are used on the USB
device
➜ Empty Folder appears if no audio file is
found on the USB device
3 Play audio files on the USB as you do with the
albums/tracks on the HD (see 6.HD).
Helpful hint:
– Due to compatibility reasons, the album/track informa-
tion may differ from what will be displayed through the
flash player’s music management software.
10.1.3 Transferring music to
the USB device
IMPORTANT!
– Recording is permitted only if there is no
infringement of copyrights or any other
rights of third parties.
– You cannot transfer music to USB MTP
device.
– The making of unauthorized copies of
copy-protected material, including
computer programmes, files, broadcasts
and sound recordings, may be an
infringement of copyrights and constitute a
criminal offence.This equipment should not
be used for such purposes.
1 Check that the USB device is properly connect-
ed to the Center.
2 Press HOME.
– If it is in HD playing mode, press STOP to
stop playing
3 Press the navigation controls 3 or 4 and 2 to
select your option and enter its corresponding
list of tracks (if necessary)
4 In the track list screen, press REC 0
➜ The list of tracks appears.
5 Press MARK•UNMARK to select or deselect
the tracks to be recorded.
● To select/deselect all tracks, press and hold
MARK• UNMARK.
Helpful hint:
– Press 1 to stop selecting tracks and return to the
list of tracks.To continue, repeat Steps 3 to 5.
p1-67-wac3500_ifu_UK 2007.6.20 5:49 PM Page 45