Philips WAC3500 - Page 51

51
English
11. Network setting
On the Center
1 Check that WAC3500 Center is in HD source
2 Press MENU to enter the menu screen
3 Press the navigation controls 3 or 4 and 2 to
enter Station Mgnt menu
4 Press 3 or 4 and 2 to select Add New
Station
➜ You will enter Installation Mode. Searching
for the new station starts
➜ Playback stops on the previously associated
Station if you are playing the HD source
Helpful hints:
– If there are 5 stations connected, Add New
Station option will not present. In this case,
please delete a station first, and then to add
new stations
On Stations
5 Remove the power plug of the Stations, and
then connect them to the power supply again
➜ Connecting to Center appears
6 a: For WAS700, press SOURCE repeatedly to
enter AUX mode, and then press MENU
to select Installation Mode
b: For other stations, press MENU to select
Installation Mode
➜ HD screen appears if the Station is connect-
ed to the Center
➜ The Center and the Stations are now in the
same Wi-Fi network
On the Center
7 Press STOPÇ when all the Stations are
found.
p1-67-wac3500_ifu_UK 2007.6.20 5:49 PM Page 51