Philips WelcomeEye Connect 3 - Page 14

EN10
WelcomeEye Connect 3 / V2
1
3
5
2
4
6
1 Gate A
3 Lock A
5 Bus A
Gate B 2
Lock B 4
Bus B 6
7
11 12 13
10
8 9
1
3
5
2
4
6
1 Gate A
3 Lock A
5 Bus A
Gate B 2
Lock B 4
Bus B 6
1
5
2
4
6
1 Gate A
3 Lock A
5 Bus A
Gate B 2
Lock B 4
Bus B 6
OPTION OPTION
1- The lens of the panel must be placed at a height around 1.60m.
2- Remove the tamper-resistant screw from underneath the intercom panel, using the tool provided.
When unscrewed, the screw retracts into the intercom panel and releases the front panel.
3- Tilt the front of the panel to remove it.
4- Remove the protective silicone cover.
5- Mark the position of the 4holes on the wall.
6- Drill.
7- Use pegs adapted to the type of bracket (the screws provided are suitable for solid walls).
8- Secure the panel with appropriate screws.
9- The connection cables must run through the central hole in the intercom panel and exit through
the front.