Philips WelcomeEye Connect 3 - Monitoring Function; Photo and Video Album

EN12
WelcomeEye Connect 3 / V2
6.2. Monitoring function
Door 1
1 2 3 4 5 6
1: Use the and icons to scroll between each image source. If two intercom panels are installed,
switches to the view of the second intercom panel. If you have Philips WelcomeEye Look or
WelcomeEye View cameras and they have been reported in your monitor’s settings menu, you can
switch to their image.
2: Used to open the electric strike plate of the intercom panel being viewed.
3: Used to open the gate of the intercom panel being viewed.
4: Activates the microphones on the intercom panel and the monitor to allow you to talk or call
out to your visitor.
Note: if you have activated the “Voice change” option in “Other settings”, the following display
will appear:
Allows you to respond by distorting your voice (making it deeper) to ensure condentiality
Allows you to respond using your own voice without distortion
5: Allows you to take a photo and save it in the monitor’s memory (or the microSD card if one has
been installed in the monitor).
6: Allows you to start capturing a video and save it in the monitor’s memory (or the microSD card
if one has been installed in the monitor).
6.3. Photo and video album
2
Allows you to access the album of photos and videos recorded during calls or at your request. The
red notication indicates the number of unread photos/videos.
10/04/202411:19
Door 1
16:56:40 07/05/2024
Door 1
16:26:30 06/05/2024
WelecomeEye View
10:32:10 03/05/2024
Door 1
16:32:00 06/05/2024
Door 1
16:46:05 03/05/2024
WelecomeEye View
10:32:00 03/05/2024
Door 1
16:28:13 06/05/2024
Door 1
10:50:24 03/05/2024
- Each photo or video is named with the device that recorded it (intercom panel 1, intercom panel 2,