Philips WelcomeEye Connect 3 - Add Device

EN17
WelcomeEye Connect 3 / V2
6
Melodies
10/04/202411:19
Melodies
Entry panel 1 Entry panel 2 Intercom
Here you can assign a chime to intercom panel 1, intercom panel 2 if any, and to the intercom
function if there are several monitors.
Note: by default, the monitor has 6chimes. You can create 2additional customised chimes from an
.mp3 le on the Philips Door Connect mobile application. Please refer to the “Mobile apps” section
of this manual to nd out more.
7
Add device
10/04/202411:19
Add device
Monitor Camera
Check the installation Diagram
Here you can set up the additional monitors in the installation and connect them to the Philips
WelcomeEye View and WelcomeEye Look cameras on the same network and the same Philips Door
Connect account as your monitor. You can use the “Check installation diagram” button to check
that your monitor is correctly connected to your intercom panel.