Philips WelcomeEye Connect 3 - Add Camera

EN18
WelcomeEye Connect 3 / V2
a. Monitor
Monitor
Dene the role of your monitor here: main (this is the monitor that is connected to the WiFi
network and controls all communications between the various elements of the installation),
additional 1 or 2 for additional monitors on the installation.
Please note: after a conguration change in this menu, the monitor must be restarted.
Once the monitor has been restarted, disconnect the power supply to all the monitors in
the installation and reconnect the power supply to implement the changes. The intercom
panel must not be powered, so all monitors must be switched o at the same time, not one
after the other.
b. Camera
Camera
If Philips WelcomeEye View or Look cameras are present on the same network as your
videophone, you can report them here. In addition to the cameras’ default functions, you
will be able to display their image and sound directly from your videophone monitor. You
can also switch between the image from your intercom panel and that of your camera with a
single click using the Philips Door Connect application.
Your videophone can include up to 4dierent cameras:
10/04/202411:19
Camera
Click on one of the 4boxes to assign a camera:
10/04/202411:19
Add camera
Waiting...