Philips WelcomeEye Connect 3 - Technical Specifications

EN39
WelcomeEye Connect 3 / V2
Note: if instead of holding the call button in the above procedure, you hold the top name holder for
30seconds, the intercom panel will revert to main intercom panel no. 1.
9. TECHNICAL SPECIFICATIONS
Monitor:
Ref. 531048
- 2wires
- 7" touch screen
- Resolution: 1024 x 600
- Slot for class 10 micro SDXC card up to 128GB (not supplied)
- 2.4GHz WiFi and 5GHz IEEE 802.11 b/g/n/ac
- Radio power emitted: 20dBm maximum
- Current consumption: 500mA max
- Power consumption: 12W max (7W max on standby)
- 6chimes + 2additional customisable chimes from the Philips Door Connect application (85dB)
- Dimensions: 132 (h.) x 190 (w.) x 18 (d.)mm anchor plate included
Intercom panel:
Ref. 531045
- C-MOS colour sensor 3K 2592 x 1944px
- Viewing angle 165° diagonal, 130° horizontal
- Colour night vision without lighting using brightness and contrast compensation
- Strike plate control 12V 1.1A, adjustable time 1 to 5s
- Gate control: breaking capacity 12V 2A
- RFID 125kHz
- IP55 IK08
- Operating temperature -20°C to +50°C
- Dimensions: 152 (H) x 70 (W) x 37 (D)mm
Application:
Philips Door Connect app