Philips WelcomeEye Connect 3 - Smartphone Application; Connecting a Monitor to the Wifi Network

EN24
WelcomeEye Connect 3 / V2
8. SMARTPHONE APPLICATION
8.1. Connecting a monitor to the WiFi network
Before using the Philips Door Connect application, you need to connect your monitor to the WiFi
network.
10/04/202411:19
Wi
Tranfer to mobile
Informations
In your monitor’s WiFi menu, click on “Information”:
10/04/202411:19
Wi informations
Network
Waiting
Click on “add network”: the list to the right of the screen will show the WiFi networks within range
of the monitor. Select one of them, enter its password and click on “Conrm”.
After a few moments, the monitor shows that it is connected to the WiFi network and the Internet.
A QR code appears at the bottom right of the screen: you can use it to set up your system using the
Philips Door Connect application.