Philips WelcomeEye Connect 3 - Safety Precautions; Fcc;Ce Warning

EN44
WelcomeEye Connect 3 / V2
12. SAFETY PRECAUTIONS
Damage caused by failing to adhere to the manual nullies the warranty. We will not accept liability
for damage resulting from non-compliance!
We will not accept liability for any harm to goods or people caused by improper handling or failure
to adhere to safety instructions.
This product was manufactured in total compliance with safety guidelines. In order to maintain
this status and provide for the best possible conditions of use, the user must adhere to the safety
instructions and warnings in this manual.
: This symbol indicates a risk of electrical shock or short-circuiting.
- Only use this product with electrical current in the following ranges: 100-240Volts and 50-60Hertz.
Never attempt to use this device at a dierent voltage.
- Ensure that all the system’s electrical connections conform to the instructions for use.
- In commercial establishments, ensure that you adhere to the electrical installation accident
prevention regulations.
- In schools, training facilities, workshops, etc., qualied personnel must be on hand to monitor
electronic equipment operation.
- You must follow the instructions for use of any other devices connected to the system.
- Please contact an experienced person if you have any doubts regarding equipment operation or
safety.
- Never plug in or unplug electrical equipment with wet hands.
- When installing this product, check that the power supply cables are not at risk of being damaged.
- Never replace damaged electrical cables yourself! In this case, remove them and call an expert.
- The mains supply should be located close to the device and must be easily accessible.
- An easily accessible cut-o system (switch disconnector, circuit breaker, equivalent system) must be
integrated into the building’s wiring system for equipment connected to the power grid.
- Keep a minimum distance around the device to guarantee sucient ventilation.
- Ventilation should not be blocked by covering the ventilation opening with an object such as a
newspaper, tablecloth or curtain, etc.
- No open ame source such as a burning candle must be placed on the device.
- Respect the product’s operating temperature.
- The device must not be exposed to liquid ow or splashing. Do not place any objects lled with
liquid, such as vases, on the device.
13. FCC/CE WARNING
Note: This equipment has been tested and found to be compliant with the limits of a Class B
device, according to European standards in force. These limits are designed to provide reasonable
protection against interference in a residential installation. This equipment uses and may emit radio
frequency energy and, if not tted and used according to the instructions, may cause interference
to radio communication.
There is no guarantee, however, that interference will not occur in a particular system. If this
equipment causes interference to radio or TV reception, which can be established by starting and
stopping it, users are encouraged to try to correct the interference using one of the following
methods:
• Increase the distance between the equipment and the receptor.
• Connect the equipment to a socket belonging to a different circuit from the one to which the
receptor is connected.