Setting: set up the app settings.
[Installation Instructions]
1. Close automobile engine:
2. Insert the Micro SD card into TF card slot
【Notice】Please use high speed memory card (Class 10), capacity could not less than 512MB, micro sd card maximum support 32GB.
3. Fix the car camera onto the car’s original rearview mirror with rubble rings.
4. Plug the car charger into car cigarette lighter.
Connect the car charger with car camera USB port.
【Notice】Arrange the car charger cable to be laid along the edge of windshield.
6. Install the rear camera on the backside of car, please notice the install direction. Arrange the rear camera cable to be laid along the vehicle roof. After rear camera
cable arrangement, please plug into the car camera’s AV-IN port.
7. Adjust the camera lens position, ensure the lens level with ground.
8. Start automobile engine, check whether the car camera installation is correct.
【Notice】If install correctly, system working indicator lights; car camera will enter recording status, video recording indicator flash. Please check whether the screen
display image is normal, if it is inverted image, please don’t hesitate to contact us.
This is the car mirror dvr wiring diagram:
To Next Page
Loading...