R
Richard BrownAug 29, 2025
What does error A006 mean on a Phocos Inverter?
- AalexandracollinsAug 29, 2025
If the Phocos Inverter shows error A006, it indicates a high frequency of the public grid.
To Next PageTo Next Page
What does error A006 mean on a Phocos Inverter?
If the Phocos Inverter shows error A006, it indicates a high frequency of the public grid.
What does error E010 mean on a Phocos Inverter?
If the Phocos Inverter shows error E010, it means there is a large leakage current of the system or inverter.
What does error E009 mean on a Phocos Inverter?
If the Phocos Inverter shows error E009, it means the master-slave DSP communication is disabled or there is an error of master-slave DSP check bit.
What to do if Phocos Controller shows overload error?
If your Phocos Controller displays an overload error because the inverter is overloaded beyond its allowed duration, reduce the connected load by switching off some equipment.
Why Phocos Controller battery voltage is too high?
If the battery voltage is too high on your Phocos Controller, check if the specifications and quantity of batteries meet the requirements.
What to do if my Phocos Any-Grid shows fault code 85 - AC output current unbalanced?
If your Phocos Battery Charger displays fault code 85 indicating AC output current is unbalanced, try restarting the inverter. If the issue persists, remove excessive loads and re-check the load information from the LCD of the units.
What to do if my Phocos Battery Charger shows that the battery is not connected?
If your Phocos Battery Charger shows that the battery is not connected and the battery is connected correctly, or the internal fuse has blown, please return to repair center.
What does error E001 mean on a Phocos Inverter?
If the Phocos Inverter shows error E001, it indicates a DC input overvoltage.
What does error E018 mean on a Phocos Inverter?
If the Phocos Inverter shows error E018, this indicates a DC input overcurrent.
What does error E005 mean on my Phocos Inverter?
If the Phocos Inverter displays error E005, this indicates an internal AC overcurrent.
General| Brand | Phocos |
|---|---|
| Model | Any-Grid Series |
| Category | Battery Charger |
| Language | English |
Crucial safety warnings and precautions for installation and maintenance.
Detailed steps and warnings for safely connecting the battery to the unit.
Instructions for connecting the AC power source and loads to the inverter.
Guidance on connecting the solar PV array to the inverter, including voltage/current limits.
Instructions for connecting multiple Any-Grid units in various system configurations.
Guide to navigating and setting various operational parameters of the inverter.
Lists fault codes, their events, and corresponding screen views for troubleshooting.
Lists warning codes, associated events, audible alarms, and screen views.
Addresses problems like unit shutdown, no response, AC source issues, and relay problems.
