• Remove cartridge from packaging
`
Caution: Remove plastic plugs
from inlet and outlet before
proceeding
• Open blue door and lift lever on left
side of dual conditioning cartridge
mechanism
• Insert conditioning cartridge. Align
base of cartridge with contour in
base of system
• Slowly lower lever making sure
fittings align with the openings in
the cartridge.
Caution: DO NOT APPLY
EXCESSIVE FORCE when
lowering lever or damage
may occur. Realign cartridge
and fittings if significant
resistance is felt.
• Ensure lever is in its fully down and
locked position
To Next Page
Loading...