Phottix Laso - Page 12

12
Picture 4
Turn on/o the Phottix Laso
Transmitter
1. Turn On: Press and hold the power button
until MENU interface is displayed on LCD
screen.
2. Turn o: Press and hold the power button
until the LCD screen goes blank.
Note: When
is displayed, replace the
batteries with new ones.
Checking the Version Info of the
Phottix Laso Transmitter
You can check the present rmware version
information on Phottix Laso Transmitter:
While pressing the power button to turn on
the Transmitter, press the ash < >
button simultaneously until the version info is
displayed on the LCD screen.
<
>
Charge Lamp/Test Flash
Button
Charge Lamp/Test Flash Button