Physik Instrumente C-863 Mercury User Manual

Quick Start
stage parameter values directly. Appropriate starting values are given in
the User manual for the stage.
9 Make sure that the controller knows the absolute position of each axis (i.e.
that the axis is referenced). If the software did not prompt for referencing
(as in Fig. 6), it may be assuming that the current position is 0. Arrange for
the axis to move toward and stop at a limit or reference switch. See the
respective software or commands manual for details.
www.pi.ws C-863 MS173E Release 1.2.7 Page 18

Physik Instrumente C-863 Mercury Specifications

General

Brand	Physik Instrumente
Model	C-863 Mercury
Category	Controller
Language	English