Pilz PSS Series Hardware Manual

Overview
2-2 PSS(1) ControlNet Adapter - Hardware Manual
Software package
There is a separate software package available for data exchange
between the PSS and the ControlNet Scanner. The standard function
block within the software must be incorporated within the user program in
the standard section of the PSS. It carries out all of the tasks for data
exchange between the PSS and the ControlNet Scanner.
Range
The hardware package consists of:
• One module
- PSS ControlNet Adapter or
- PSS1 ControlNet Adapter
• One operating Manual
PSS(1) ControlNet Adapter - Hardware Manual

Pilz PSS Series Specifications

General

Category	Safety Equipment
Manufacturer	Pilz
Safety Standards	EN ISO 13849-1, IEC 61508, IEC 62061
Series	PSS
Safety Integrity Level	SIL 3
Communication Interfaces	Ethernet, PROFIBUS, PROFINET
Operating Voltage	24 V DC
Operating Temperature	0°C to +55°C (typical), others depending on model
Storage Temperature	-20°C to +70°C (typical), others depending on model
Protection Class	IP20
Application	Industrial safety applications