Pilz PSS Series Hardware Manual

Safety
PSS(1) ControlNet Adapter - Hardware Manual3-2
Warranty and liability
All claims to warranty and liability will be rendered invalid if
• The module was used contrary to the purpose for which it is intended
• Damage can be attributed to not having followed the guidelines in the
operating manual
• Operating personnel are not suitably trained or sufficiently qualified
• The housing was opened
• Changes have been made (e.g. by exchanging components or soldering
work etc.).
Disposal
The unit must be disposed of properly when it reaches the end of its
service life

Pilz PSS Series Specifications

General

Category	Safety Equipment
Manufacturer	Pilz
Safety Standards	EN ISO 13849-1, IEC 61508, IEC 62061
Series	PSS
Safety Integrity Level	SIL 3
Communication Interfaces	Ethernet, PROFIBUS, PROFINET
Operating Voltage	24 V DC
Operating Temperature	0°C to +55°C (typical), others depending on model
Storage Temperature	-20°C to +70°C (typical), others depending on model
Protection Class	IP20
Application	Industrial safety applications