Pilz PSS Series Hardware Manual

PSS(1) ControlNet Adapter - Hardware Manual 1
Introduction 1-1
Overview of manual 1-2
Terminology 1-3
Definition of symbols 1-4
Overview 2-1
Module versions 2-1
Software package 2-2
Range 2-2
Safety 3-1
Intended use 3-1
EMC 3-1
ESD 3-1
Warranty and liability 3-2
Disposal 3-2
Safety guidelines 3-3
Use of qualified personnel 3-3
Unit-specific safety regulations 3-3
Installing the module 3-4
Cable material and cable layout 3-4
Measures to protect against interference 3-4
Assembling and connecting the module 3-4
Function 4-1
Module’s operating elements 4-1
Net Address 4-1
Status indicators 4-1
Module interfaces 4-2
ControlNet interfaces 4-2
Network Access Port (NAP) 4-2
Module's mode of operation 4-2
Contents

Pilz PSS Series Specifications

General

Category	Safety Equipment
Manufacturer	Pilz
Safety Standards	EN ISO 13849-1, IEC 61508, IEC 62061
Series	PSS
Safety Integrity Level	SIL 3
Communication Interfaces	Ethernet, PROFIBUS, PROFINET
Operating Voltage	24 V DC
Operating Temperature	0°C to +55°C (typical), others depending on model
Storage Temperature	-20°C to +70°C (typical), others depending on model
Protection Class	IP20
Application	Industrial safety applications