Pilz PSS Series Hardware Manual

Introduction
1-2 PSS(1) ControlNet Adapter - Hardware Manual
Overview of documentation
1 Introduction
The introduction is designed to familiarise the user with the contents
and structure of this manual and the definition of the symbols used
within the manual.
2 Overview
Provides information on the most important features of the module
and gives a brief outline of the application area.
3 Safety
This chapter must be read as it contains information on the safety
requirements to be met and the intended use.
4 Function Description
Contains detailed information on the functionality of the module.
5 Module
This chapter explains the operator elements of the modules.
6 Installation and Configuration
This chapter shows you how to install and configure the module.
7 Commissioning and Operation
This chapter is designed to provide support during commissioning and
how the module is put into operation.
8 Technical Details
Tables containing technical details.
9 Appendix
Includes a description of changes to the manual.

Pilz PSS Series Specifications

General

Category	Safety Equipment
Manufacturer	Pilz
Safety Standards	EN ISO 13849-1, IEC 61508, IEC 62061
Series	PSS
Safety Integrity Level	SIL 3
Communication Interfaces	Ethernet, PROFIBUS, PROFINET
Operating Voltage	24 V DC
Operating Temperature	0°C to +55°C (typical), others depending on model
Storage Temperature	-20°C to +70°C (typical), others depending on model
Protection Class	IP20
Application	Industrial safety applications