Pima FORCE Installation Guide

Force Security System - Installation Guide
52
Appendix D Technician and CMS codes
There are two technician codes in the FORCE security system: Master technician code, and CMS
lock code, which allows limiting the access to the CMS menus by a password. Following is
information on each code.
D.1 Master technician code
By default, and as long as no CMS lock code (see next) has been set, the Master technician
code enables to access all the technician menus, including all the CMSs’.
To enter the technician menu for the first time, follow the next steps:
1. The user must grant you access by pressing on Technician Permit ( User menu/
Other Options ).
2. Immediately enter the default Master technician code 1234 .
3. In the code menu, enter a new 4-6 digit Master technician code and press Enter .
D.2 CMS lock code
The CMS lock code ensures the CMS definitions from unauthorized access. Setting such a code
prevents the Master technician code from accessing the locked CMS menus.
The CMS lock code is to be used, only when a technician needs to set the CMS
definitions and doesn’t have the Master technician code in hand.
If you need to set the CMS definitions and you don’t have the Master technician code, follow
the next steps:
1. The user must grant you access via the Technician Permit menu ( User menu/Other Options ).
2. Immediately enter the default Master technician code, 1234 -
the next undefined CMS lock code screen is displayed
18
.
3. Enter a new 4-6 digit lock code.
4. Press the “Back” button.
From now on, these CMS definitions are only accessed using the new lock code. Whenever
there will be a need to change or view these CMS’s definitions, the user will have to approve it,
after pressing the Technician Permit menu. A technician that has the Master technician code,
will not be able to view or change these definitions.
18
Providing there is an available CMS menu
Technician Menu
CMS NO. 2
CMS Lock Code:--
Press Back to Exit
New 4-6 digit
Master Technician Code
All the technician menus
are accessible, as long as
no CMS Lock code is set
How to change the default
Master Technician code:
1234
User must approve by
pressing Technician Permit
1234
New 4-6 digit
CMS Lock Code
Only allows accessing the CMS’s
definitions. The Master technician
code cannot access these menus
How to set
CMS Lock code:
User must approve by
pressing Technician Permit

Pima FORCE Specifications

General

Brand	Pima
Model	FORCE
Category	Security System
Language	English