Pinion Smart.Shift - Page 31

31
The compact Pinion TE1 E-trigger shift lever has been specially
developed for shifting with Pinion Smart.Shift shifting
technology. The aim is to give you clear haptic feedback. With a
defined lever movement and sophisticated micro switch tuning,
you can initiate every gear shift with precision. Maintenance-
free and waterproof in accordance with IP66, the TE1 is the
optimal control in every situation.
Ergonomics
The TE1’s rubberised button surfaces offer ideal contact points
for the thumb with their texture. The two buttons on the TE1 are
designed to ensure a natural circular path for the thumb to
reach the touch surfaces. With the clamp, the TE1 can be
screwed in 2 positions for different space conditions on the
handlebar and for different hand sizes. By rotating the
handlebar, you can adjust the individual reach of the thumb,
depending on the riding position and the resulting wrist angle.
You can set the button assignment individually, see the
chapter "Settings" [p.41].
Mounting options
The TE1 E-trigger shift lever is designed for mounting on the
right-hand side of the handlebar.
● Instead of the Pinion clamp, the TE1 can also be installed
with combination clamps from other manufacturers (such
as Magura ShiftMix3, SRAM MMX).
● The cable must be attached to the underside of the
handlebar in such a way that the adjustability of the TE1
E-Trigger is guaranteed without sharply bending or
crushing the cable or putting it under tension.
● Make sure that there is no collision with the shift levers
when operating them and other components (especially the
brake).