Pioneer PDP-436SXE - Page 128

PDP-436SXE
128
1234
1234
C
D
F
A
B
E
Lightly press the Front case.
1
Two screws (ABA1332)
2
Four screws (BBZ40P180FTB)
3
Nine screws (APZ30P100FTB)
4
Two screws (ABA1332)
5
Under cover (436SX)
(See Procedure ø.)
About reattachment of the Front case Assy 43
When reattaching the Front case Assy with the Rear case
attached, be sure to install the screws in the order described
below:
Rear case (436SX)
-1
1
5
-3
3
-1
3
-2
3
-1
4
-2
4
-2
1
Note:
While the screws in Steps 1 and 2 are being installed, the Front
case tends to shift upward. In order to not allow any undesired gap
between the Rear case and the Front case, while tightening the
screws, lightly press and hold the four locations near the screws
indicated with arrows in the photo at right.
3
3
3
3
3
3
Under cover (436SX)
-1
2
-2
2
-3
2
-4
2