PDP-436SXE
129
5678
56
7
8
C
D
F
A
B
E
Speaker BOX Assy L and R
5
1
Remove the three screws.
2
Remove the one screw.
(As this screw is made of stainless steel, it does not cling to
a magnetized screwdriver. Care must be taken not to drop
and lose it.)
3
Disconnect the speaker cable.
4
Detach the cable from their cable ties and disconnect the cable.
5
Remove the speaker BOX Assy R.
Speaker BOX Assy R
1
Remove the three screws.
2
Remove the one screw.
(As this screw is made of stainless steel, it does not cling to
a magnetized screwdriver. Care must be taken not to drop
and lose it.)
3
Disconnect the speaker cable.
4
Remove the speaker BOX Assy L.
Speaker BOX Assy L
Terminal Panel E
6
1
Remove the rear cover.
2
Remove the 15 screws.
3
Remove the two screws.
4
Remove the seven screws.
5
Disconnect the connector. (SR connector)
6
Disconect the connector. (AC inlet)
7
Remove the terminal panel E.
1
1
1
1
2
2
2
2
2
4
2
1
3
4
5
3
1
4
LED Assy
cable tie
Speaker BOX
Assy R
Terminal Panel E
Terminal Panel E
Rear cover
Speaker BOX
Assy L
2
1
2
7
5
6
2
2
2
2
2
2
2
2
2
4
×3
4
×4
3
×2
To Next Page
Loading...
