03
24
En
Operating the TV
with the player’s
remote control
When the manufacturer code for your brand of TV
is set on the player’s remote control, the TV can be
operated using the player’s remote control.
Caution
• The setting may be restored to the default after
the batteries are replaced. If this happens, reset
it.
1 Input the 2-digit manufacturer code.
Press the number buttons (0 to 9) to input the
code while pressing TV CONTROL ^.
Note
• The factory default setting is 01 (PIONEER).
• If you make a mistake when inputting the code,
release TV CONTROL ^ then start over from the
beginning.
• When there are multiple codes for a
manufacturer, try inputting them in the
indicated order until the TV can be operated.
2 Check that the TV can be operated.
Operate the TV using TV CONTROL.
^ – Press to turn the TV’s power on and off.
INPUT – Press to switch the TV’s input.
VOL +/– – Press to adjust the volume.
TV Preset code list
Important
• We do not guarantee the operations of all the
manufacturers and devices listed. Operation
may not be possible even if a preset code is
entered.
Manufacturer Code(s)
PIONEER 01
ALBA 07, 24, 27
BUSH 07, 24, 27
CHANGHONG 05, 22
CONIA 28
DSE 29
FUNAI 14
GRUNDIG 16
HAIER 15
HISENCE 12
HITACHI 19
JVC 17
KONKA 21
LG ELECTRIC 08, 10
LOEWE 07, 24, 27
METZ 23
MITSUBISHI 06
NEC 25
ORION 20
PANASONIC 02
PHILIPS 07, 24, 27
SAMSUNG 09
SANYO 18
SHARP 04, 26
SKYWORTH 11
SONY 03
TCL 13
TOSHIBA 05
VICTOR 17
VIZIO 08, 10
To Next Page
Loading...
Need help?
General
Weight and Dimensions
