Pioneer UDP-LX800 User Manual

04
30
En
Displaying the disc
information
 Press DISPLAY.
• The disc information appears on the TV screen.
To switch off the information display, press
DISPLAY again.
• The information display differs between during
playback and when playback is stopped.
• During audio CD playback, the track elapsed
playing time appears on the TV screen. Each
time you press DISPLAY, it changes shown
as below.
Track remaining time
 Disc elapsed time 
Disc remaining time
 No information  Track
elapsed time
• Pressing and holding DISPLAY for two
seconds or more will display the detailed
information of the disc on the TV screen.
Pressing it again will close the display.
• The page can be switched by pressing /
while the detailed information of the disc is
being displayed.
Enjoying BONUSVIEW or
BD-LIVE
This player is compatible with BD-Video
BONUSVIEW and BD-LIVE.
When using BD-Video discs compatible with
BONUSVIEW, you can enjoy such functions as
secondary video (picture in picture) (page 32) and
secondary audio (page 32). With BD-Video discs
supporting BD-LIVE, special video images and
other data can be downloaded from the Internet.
Data recorded on BD video and downloaded from
BD-LIVE is stored on the USB flash drive (external
memory). To enjoy these functions, connect a USB
flash drive (minimum 1 GB capacity, 2 GB or
greater recommended) supporting USB 2.0 High
Speed (480 Mbit/s) to the USB port.
• When you insert or remove a USB flash drive,
be sure to turn the player’s power off.
• To recall data stored in the USB flash drive, first
insert the disc media that was being used at the
time the data was downloaded (if a different
disc is loaded, the data stored on the USB flash
drive cannot be played).
• If a USB flash drive containing other data
(previously recorded) is used, the video and
audio may not play back properly.
• Do not disconnect the USB flash drive while
playback is in progress.
• Some time may be required for the data to load
(read/write).
Caution
• It may not be possible to use the BONUSVIEW
and BD-LIVE functions if there is insufficient
space on the USB flash drive. In this case, refer
to Erasing data that has been added to BDs
and application data on page 45 for erasing the
Virtual Package data and the BD-LIVE data in
the USB flash drive.
Note
• Operation of USB flash drives is not
guaranteed.
• Playback of BD-LIVE function data differs
depending on the disc used. For details, consult
the user instructions supplied with the disc.
• To enjoy the BD-LIVE function, a network
connection and settings are required (pages 22
and 44).
• BD-LIVE is a function that provides for
connection to the Internet. Discs supporting
the BD-LIVE function may send ID codes
identifying this player and the disc to the
contents provider via the Internet.

Pioneer UDP-LX800 Specifications

General

Device type	HiFi CD player
Product color	Black
DVD region code	-
Number of HDMI outputs	2
Number of products included	1 pc(s)
High Dynamic Range Imaging (HDRI)	Yes
Color depth	36 bit
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.45 W
Power consumption (typical)	42 W
Cables included	AC
Playback disc types	BD-R, BD-R DL, BD-RE, BD-RE DL, BD-ROM, CD-R, CD-ROM, CD-RW, DVD+R, DVD+R DL, DVD+RW, DVD-R, DVD-R DL, DVD-ROM, DVD-RW
Playback disc formats	CD audio, DVD-Video
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Digital audio coaxial out	1
TV tuner integrated	No
Video formats supported	AVCHD
Audio decoders	DTS-HD Master Audio

Weight and Dimensions

Depth	339 mm
Width	435 mm
Height	131 mm
Weight	13800 g